Products
Manufacturers
Categories
Copper Connectivity
Digital Loop Carriers
Ethernet
Fiber Connectivity
Hardware
Integrated Access Devices
Legacy Equipment
Power Products
Radio
SONET
Product   |
Manufacturer |
|||
|---|---|---|---|---|
 |
FGSB-MSNC-F | Commscope Connectivity Solutio | ||
| KIT FGS HINGED COVER 4x12 blac | ||||
|
FL2-C480096PN-4A02 | Commscope Connectivity Solutio | ||
| FL2 PANEL TERM/SPLICE LCUPC W/ | ||||
 |
FlexDSX (#DFX-100084) | Commscope Connectivity Solutio | ||
| A ADCT_CHASSIS_84 TERMINATION FULLY LOADED FLEXDSX FRONT The DFX-100084 is an 84-termination fully loaded FlexDSX front cross-connect chassis. The chassis includes 42 odd and 42 even individually removable 4-port jack access cards, one large front cable tray, red LEDs, and one designation label. The... | ||||
|
FSB-SBN23200C0000C | Commscope Connectivity Solutio | ||
| FSB WALL BOX 32 FIBER SC UPC A | ||||
|
104059373 | Commscope Connectivity Solutio | ||
| LABEL DESIGNATION BLANK 100 PR | ||||
|
247137-000 | Commscope Connectivity Solutio | ||
| FOSC400-B4-12-1-BGV | ||||
 |
BNC-1 (#BNC-1) | Commscope Connectivity Solutio | ||
| A ADCT_CBL_STRAIGHT 75 OHM PLU The BNC-1 is a straight BNC 75 Ohm plug connector for 734, 1505A cable type. The connector offers improved performance with true 75 Ohm characteristic impedance through the entire connector, gold-plated locking center conductor, .625" crimp sleeve... | ||||
 |
DI-G2CU1 (#DI-G2CU1) | Commscope Connectivity Solutio | ||
| A ADCT DSXI 84 CIRCUIT CROSS C The Di-G2CU1 is an 84-termination, rear cross-connect DSXi® panel for patching, terminating, and rearranging circuits using DS1 (1.544 Mbps) or E1 (2.048 Mbps) signal rates. With product innovations like higher density and a technic ... | ||||
 |
dual 735A cross-connect jumper (#XCC-BBXD-010) | Commscope Connectivity Solutio | ||
| A ADCT_FACTRY TRM XCONN JPR_BN The XCC-BBXD-010 is a 10-foot dual 735A cross-connect jumper with factory terminated BNC connectors on both ends and a tracer messenger wire. Cross-connect jumpers are available in a variety of configurations to match the type of DSX-3... | ||||
 |
735A cross-connect jumper (#XCC-BBXD-004) | Commscope Connectivity Solutio | ||
| ADCT_FACTRY TRM XCONN JPR_BNC/ The XCC-BBXD-004 is a 4-foot dual 735A cross-connect jumper with factory-terminated BNC connectors on both ends and a tracer messenger wire. Cross-connect jumpers are available in a variety of configurations to match the type of DSX-3 cross-connect... | ||||
|
PCH-BMXD-020 | Commscope Connectivity Solutio | ||
| C A D 735 BNC MID 020FT | ||||
|
KCE-FCA500X1000 | Commscope Connectivity Solutio | ||
| KCE FCA500X1000 | ||||
|
DSX-3 (#DSX4R-D24) | Commscope Connectivity Solutio | ||
| ADCT_CHAS_24 POS_UNLOADED W/ F The DSX4R-D24 is a 24-position unloaded DSX-3 rear cross-connect chassis. The chassis includes an adjustable rear cable tray, front and rear red LEDs, and a set of designation labels. Jumper rings are sold separately. The chassis mounts flush or... | ||||
 |
BNC-RA-3 (#BNC-RA-3) | Commscope Connectivity Solutio | ||
| A ADCT BNC PLG 735 CBL RIGHT A The BNC-RA-3 is a right angle BNC 75 Ohm plug connector for 735, NT735 cable type. The connector offers improved performance with true 75 Ohm characteristic impedance, .625" crimp sleeve for greater pulloff force, and 100 percent guided mating. The... | ||||
|
BT2000-12 (#BT2000-12) | Commscope Connectivity Solutio | ||
| ADCT_INSERT/WITHDRAWEL TOOL FO The BT2000-12 is a BNC connector insertion tool with a 12-inch handle. | ||||
|
FPCFW-APSC/PLCP12M | Commscope Connectivity Solutio | ||
| FIBER PATCHCORD SM RED BND SCA | ||||
|
FPCFW-APSC/PLCP10M | Commscope Connectivity Solutio | ||
| FIBER PATCHCORD SM RED BND SCA | ||||
|
TP6TZR-GY30 | Commscope Connectivity Solutio | ||
| GY PC RJ45 TO RJ45 C6 30FT | ||||
|
PCH-BMXD-016 | Commscope Connectivity Solutio | ||
| C A D 735 BNC MID 016FT | ||||
|
DI-N2GU1 (#DI-N2GU1) | Commscope Connectivity Solutio | ||
| A 56 CKT XCONN PNL REAR W/W 19 The Di-N2GU1 is a 56-termination, front-below cross-connect DSXi® panel for patching, terminating, and rearranging circuits using DS1 (1.544 Mbps) or E1 (2.048 Mbps) signal rates. With product innovations like higher density and a... | ||||
 |
Crimp Tool (#WT-2) | Commscope Connectivity Solutio | ||
| ADCT_MISC_COAX CRIMPING TOOL The WT-2 is a crimp tool with an ergonomic handle for ADC die sets. Exceptional life, rated for 100,000 crimp cycles. Fully adjustable for preloading to maintain die set alignment. Durable ergonomic handle provides greater comfort. | ||||
 |
Crimp Die Set (#WD-2) | Commscope Connectivity Solutio | ||
| ADCT_MISC_CRIMP DIE SET FOR WT The WD-2 is a coaxial crimp die set for .178" or .255" connector crimp sleeves; or 734, RG-59, 735, 0222 cable types. Crimp die sets, which allow connectors to be formed onto cables, are the part of the crimp tool that comes in contact with the... | ||||
 |
DI-M2GU1 (#DI-M2GU1) | Commscope Connectivity Solutio | ||
| A ADCT DSX CROSS CONNECT PANEL The Di-M2GU1 is an 84-termination, front-split cross-connect DSXi® panel for patching, terminating, and rearranging circuits using DS1 (1.544 Mbps) or E1 (2.048 Mbps) signal rates. With product innovations like higher density and a... | ||||
|
DI-T2CU1 (#DI-T2CU1) | Commscope Connectivity Solutio | ||
| A DSXI Panel, DS1 84 Term, Lbl The Di-T2CU1 is an 84-termination, front-below cross-connect DSXi® panel for patching, terminating, and rearranging circuits using DS1 (1.544 Mbps) or E1 (2.048 Mbps) signal rates. With product innovations like higher density and a... | ||||
|
FD3-AG432J00TBBP2 | Commscope Connectivity Solutio | ||
| FDH3000 432/432 DIEL RB 24FBR | ||||