Products
Manufacturers
Categories
Copper Connectivity
Digital Loop Carriers
Ethernet
Fiber Connectivity
Hardware
Integrated Access Devices
Legacy Equipment
Power Products
Radio
SONET
Product   |
Manufacturer |
|||
|---|---|---|---|---|
 |
DSX-3 (#DSX-4H-SBRC) | Commscope Connectivity Solutio | ||
| A ADCT_MOD_REAR XCONN_3PRT_STD The DSX-4H-SBRC is a 3-port rear cross-connect DSX-3 module with standard size jacks. This basic 3-port module includes intrusive IN and OUT switching jacks, and one non-intrusive MONITOR jack that is bridged to the OUT jack. Each module has a red... | ||||
 |
DSX-3 (#DSX4H-W3C) | Commscope Connectivity Solutio | ||
| A ADCT_CHAS_UNLOADED_24TRM_W/ REAR JPR RINGS_6 X 23 X 11 The DSX4H-W3C is a 24-position unloaded rear cross-connect DSX-3 chassis. The chassis includes four 6-inch x 4-inch (15.2 cm x 10.2 cm) rear vertical jumper rings with designation labels, and three horizontal cable bars. The chassis mounts flush or... | ||||
 |
DSX-3 (#DSX4H-W10C) | Commscope Connectivity Solutio | ||
| A ADCT_CHAS_UNLOADED_18TRM_W/ REAR JPR RINGS_6 X 19/23 X 11 The DSX4H-W10C is an 18-position unloaded rear cross-connect DSX-3 chassis. The chassis includes two 6-inch by 4-inch (15.2 cm x 10.2 cm) rear adjustable vertical jumper rings with hinged designation labels, and three horizontal cable bars. The... | ||||
 |
Termination Panel (#FL2-12RPNL) | Commscope Connectivity Solutio | ||
| A ADCF_PANEL_RACK/CABINET MT_1 The FL2-12RPNL is an empty rack or cabinet mount panel featuring 12-fiber capacity and a vertical cable management trough. It is used for fiber termination and the storage of pigtails in ADC's FL2000 series of fiber optic products. The panel is... | ||||
 |
45 Degree Up Elbow (#FGS-MU4A-C) | Commscope Connectivity Solutio | ||
| A ADCF_HW_2IN_45DEG UP ELBOW W The FGS-MU4A-C is a 2-inch, 45° up elbow and includes a snap-on cover. Junction Requirements: (2) FGS-MJWR-C | ||||
 |
Horizontal Straight Section (#FGS-MSHS-B) | Commscope Connectivity Solutio | ||
| A ADCF_HW_6IN HORIZONTAL STRAI The FGS-MSHS-B is a 6-foot-long horizontal straight section used in ADC's 6-inch FiberGuide® Fiber Cable Management System. The cover is ordered separately. The unique four-channel design of the 4- and 6-inch FiberGuide straight sections allows... | ||||
 |
Straight Section (#FGS-MSHA-C) | Commscope Connectivity Solutio | ||
| A ADCF_HW_2IN_HORZ SOLID STRAI The FGS-MSHA-C is a 6-foot-long straight section that carries fibers horizontally throughout the system. It can also be installed vertically when routing around obstructions. A snap-on cover is included. | ||||
 |
RZW (#DSX-4R-MB230) | Commscope Connectivity Solutio | ||
| A ADCT_DSX3 4R MODULE_3 PORT_E The DSX-4R-MB230 is a 3-port RZX-3 rear cross-connect module with low rear BNC connectors for the even chassis positions (i.e. 2, 4, 6). This basic 3-port module includes intrusive IN and OUT switching jacks, and one non-intrusive MONITOR jack that... | ||||
 |
4x6 Downspout (#FGS-MDSP-B) | Commscope Connectivity Solutio | ||
| A ADCF_HW_6IN DOWNSPOUT_YELLOW The FGS-MDSP-B is a 6-inch downspout with a 4-inch exit. Snap-on junctions FGS-MFAW-B are needed if the downspout is added to a horizontal fitting or straight section. Junction FGS-MJWR-B is needed if adding a vertical 4x4 fitting to the... | ||||
 |
RZW (#DSX-4R-MB240) | Commscope Connectivity Solutio | ||
| A ADCT_DSX3 4R MODULE_4 PORT_E The DSX-4R-MB240 is a 4-port RZX-3 rear cross-connect module with low rear BNC connectors for the even chassis positions (i.e. 2, 4, 6). This 4-port module includes intrusive IN and OUT switching jacks for direct access to the network element's... | ||||
 |
RZX (#DSX-4R-MB260) | Commscope Connectivity Solutio | ||
| A ADCT_DSX3 4R MODULE_6 PORT_E The DSX-4R-MB260 is a 6-port RZX-3 rear cross-connect module with low rear BNC connectors for the even chassis positions (i.e. 2, 4, 6). This 6-port module includes intrusive IN and OUT switching jacks, and auxiliary X-IN and X-OUT switching jacks... | ||||
 |
DSX (#DSX-4U-SBRC) | Commscope Connectivity Solutio | ||
| A ADCT_DSX3 MODULE_STD SIZE PL The DSX-4U-SBRC is a 3-port rear cross-connect DSX-3 module with standard size jacks. This 3-port module includes intrusive IN and OUT switching jacks, and one non-intrusive MONITOR jack that is bridged to the OUT jack. Each module has a red LED... | ||||
 |
DSX (#DSX4U-W3C) | Commscope Connectivity Solutio | ||
| A ADCT_DSX3 CHAS_UNLOADED_24TE The DSX4U-W3C is a 24-position unloaded rear cross-connect DSX-3 chassis. The chassis includes four 4-inch x 4-inch (10.2 cm x 10.2 cm) rear vertical jumper rings with designation labels, and two horizontal cable bars. The chassis mounts flush or... | ||||
 |
Standard Downspout (#FGS-MSDS-C) | Commscope Connectivity Solutio | ||
| A ADCF_HW_2IN_STANDARD DOWNSPT The FGS-MSDS-C is a 2-inch standard downspout fitting and includes a snap-on cover. Junciton Required: (2) FGS-MJWR-C | ||||
 |
Ring Panel (#DSX-PNLHR-23A) | Commscope Connectivity Solutio | ||
| ADCT_PNL_4X23INCH HORIZONTAL R The DSX-PNLHR-23A is a 4-inch x 23-inch horizontal ring panel with six cable rings (4-inch x 5-inch) designed for a 23-inch rack. This panel is pre-assembled with several rings attached for horizontal cable management. Generally, two ring panels... | ||||
 |
Interbay Management Panel (#E-501-L139) | Commscope Connectivity Solutio | ||
| 7 FT NETWORK INTERBAY MANGMNT PNL 5" WIDTH X 12" FOOTPRINT The E-501-L139 interbay management panel provides storage between 7-foot (2.14 m) bays for cross-connect jumpers. It is only used with a 14-inch (35.56 cm) trough and mounts to a standard 19 or 23-inch (48.26 or 58.42 cm) bay. A trough filler... | ||||
 |
Junction Kit (#FGS-MJWR-C) | Commscope Connectivity Solutio | ||
| A ADCF_HW_2IN_JUNCTION KIT_YEL The FGS-MJWR-C is a 2-inch junction kit used for mechanically joining sections together. Adjoining pieces are snapped together and require no tools for assembly. | ||||
 |
Junction Kit (#FGS-MJWR-A) | Commscope Connectivity Solutio | ||
| A ADCF_HW_4IN JUNCTION KIT_YEL The FGS-MJWR-A is a 4-inch downspout exit junction kit. | ||||
 |
Flex Tubing (#FGS-MIDY-50F) | Commscope Connectivity Solutio | ||
| ADCF FLEX DUCT 2 IN YELLOW SPL The FGS-MIDY-50F is slotted flex tubing 50-feet-long (15.3 m) with an outer diameter of 2.0 inches (5.08 cm). Flex tubing is used in ADC's FiberGuide® Fiber Cable Management System to feed fiber into various fiber optic terminals or fiber... | ||||
 |
Horizontal T (#FGS-MHTA-C) | Commscope Connectivity Solutio | ||
| HW_2IN_HORZ T W/CVR_YELLOW The FGS-MHTA-C is a 2-inch horizontal T fitting and includes a snap-on cover. Junction Required: (3) FGS-MJWR-C | ||||
 |
Horizontal T (#FGS-MHRT-A) | Commscope Connectivity Solutio | ||
| A ADCF_HW_4IN HOIRZONTAL T_YEL The FGS-MHRT-A is a 4-inch horizontal T. Fixed Cover: FGS-CHRT-A (sold separately) Snap-On Cover: FGS-SHRT-A (sold separately) Junction Required: (3) FGS-MFAW-A (sold separately) | ||||
 |
Horizontal Elbow (#FGS-MH9E-A) | Commscope Connectivity Solutio | ||
| A ADCF_HW_4IN 90DEG HORIZONTAL The FGS-MH9E-A is a 4-inch, 90° horizontal elbow. Fixed Cover: FGS-CH9E-A (sold separately) Snap-On Cover: FGS-MH9E-A (sold separately) Junction Required: (2) FGS-MFAW-A | ||||
 |
RZX-3 (#DSX-4R-MB130) | Commscope Connectivity Solutio | ||
| A ADCT_DSX3 4R MODULE_3 PORT_O The DSX-4R-MB130 is a 3-port RZX-3 rear cross-connect module with high rear BNC connectors for the odd chassis positions (i.e. 1, 3, 5). This basic 3-port module includes intrusive IN and OUT switching jacks, and one non-intrusive MONITOR jack that... | ||||
 |
RZW (#DSX-4R-MB160) | Commscope Connectivity Solutio | ||
| A ADCT_DSX3 4R MODULE_6 PORT_O The DSX-4R-MB160 is a 6-port RZX-3 rear cross-connect module with high rear BNC connectors for the odd chassis positions (i.e. 1, 3, 5). This 6-port module includes intrusive IN and OUT switching jacks, and auxiliary X-IN and X-OUT switching jacks... | ||||
 |
Splice Panel (#FL2-48TS875) | Commscope Connectivity Solutio | ||
| A ADCF_PANEL_48 POS_EMPTY TERM The FL2-48TS875 is an empty, 48-position, termination/splice panel used in ADC's FL2000 series of fiber optic products. The splice module provides termination capabilities, splicing protection and associated fiber/pigtail storage. The panel mounts... | ||||
 |
Attenuator (#FOA-INSC10) | Commscope Connectivity Solutio | ||
| A ADCF_ATTENUATOR_SC_IN-LINE_1 The FOA-INSC10 is an SC Ultra in-line attenuator featuring a 10.0 dB attenuation range. This fused attenuator is installed between an adapter and SC connector, providing exceptional optical performance. The fiber optic attenuator is an optical... | ||||